[ad] Empty ad slot (#6)!

home maintenance

You Should Be Looking Up More Often: Simple Ways to Check Your Roof for Damage

Even though a roof constructed in a wide-range of materials often comes with a long-lasting warranty, with might last between 20 to 30-years, a roof stills needs to be inspected at regular intervals to ensure it is maintained and doesn’t leak. 

 

For many homeowners, the first indication of a roof problem is a leaking ceiling. In this article, learn how to spot the signs of a worn or damaged roof before it causes extensive – and expensive – water damage to your home.

Detect Roof Leaks Early

To avoid expensive water damage, you need to be alert to the early signs of a leaking room. Signs of a roof leak include:

  • Dark spots on ceilings
  • Damp spots around fireplaces
  • Peeling paint on the roof trim
  • Water stains on furnace venting

Roof Repair or Roof Replacement?

With a new asphalt roof costing an average of $7,600, you want to be absolutely sure if you need a replacement. Here are some important points to consider:

Roof Age

How old is the existing roof? Most asphalt shingle roofs last 20 to 25 years before needing to be replaced. If your current roof only has one layer of shingles, and is properly ventilated, a roof repair may solve your problem. If your roof was installed over old layers of shingles and is older than 20 years, you’ll probably need a new roof.

Missing, Curling, and Buckling Shingles

Curling, buckling, and missing shingles are surefire signs that your roof needs replacing. Other signs are inconsistent color and granule loss. If your gutters are loaded with granules from your shingles, you need a roof replacement.

 

Read more: http://www.architectureartdesigns.com/you-should-be-looking-up-more-often-simple-ways-to-check-your-roof-for-damage/

TYPES OF TERMITE CONTROL

It is important to ensure that your home and its surroundings are maintained well. Termite control plays an extremely important role in home cleanliness.

 

Americans spend billions of dollars every year treating termites and repairing the damage that they cause. Because of that, homeowners take termite control very seriously. There are several types of termites, so there are several different treatments. For every treatment, the goal is to keep termites from eating the wood inside the home or business.

Many builders and homebuyers have new homes treated to prevent termites from attacking. These treatments can be done before building starts or during the building process. These treatments are usually called pre-constructiontreatments or pre–treats.

For many years, pre–construction treatments were done with liquid termiticides. While this method is still very common, there are other methods being developed. Many pre–construction treatments use a physical barrier in the soil to keep termites out of the home. These barriers might be made of gravel, sand, wire mesh, or plastic.

Pre-construction treatments are also being done with termite bait stations that are installed in the soil. In many parts of the country, the framing lumber is treated with a borate solution while the home is being built. This solution does not affect the lumber, but it makes the wood toxic to termites if they ever attack.

It is more common for homes and businesses to be treated after they have been built. These treatments are called post–construction treatments. Since subterranean termites are common in most parts of the United States, they are the termites that attack most homes.

Treatments against subterranean termites are done for two reasons — to stop termites from damaging a home or to prevent them from attacking it. If the treatment is preventive, it usually involves treating the whole house. These are often called complete treatments.

If termites have attacked a home or business, a complete treatment might be done. If the building is very large, many times only the affected area is treated. This is called a spot treatment. If part of a building is treated, it is often called a partial treatment.

Post–construction treatments often involve liquid termiticides. They are applied to the soil under a home and around the foundation to protect against subterranean termites. Liquid termiticide is often applied with …

 

Read more: http://www.termite-control.com/termite-extermination/types-of-control/types-of-termite-control/

Understanding and Identifying Roof Leaks

Simply because your home’s roof is leaking doesn’t always imply there is a hole inside it. There are many other factors behind leaking roofs maybe which you ought to address. By looking at certain weather conditions when your roofing project will help you to prevent most roof leaks, in addition to save you considerable expense.

Mentioned below are the top 3 causes your roof may be leaking.

Wind and Rain
High wind and heavy rain may damage roofing material allowing for water to get into the ceiling. Even a new roof in top condition could become leaky if wind blows water underneath the eave. Getting home insurance cover is essential in case a violent wind or thunderstorm leads to damage to your roof. A lot of roofs can be repaired or restored or worst case they may be replaced by a new roof.

Flashing
Best roofing contractors definitely will agree that 95% of leaks which aren’t associated with the roofing material will by some means be contributed to flashing failure. Flashing is built to provide a watertight transition between roofing materials and protrusions (such as chimneys, skylights, or vents) and also valleys. In many cases repairing or replacing the flashing is a probable solution. If the flashing material is still performing its job and has been installed correctly a “through-wall” flashing can take away the leak.

Blocked gutters
Easy maintenance could stop this issue in the tracks. Prior to the rainy or winter season make certain to clear leaves and other debris which has accumulated over time in your gutters. All of this debris collects in the gutters it then clogs them.

The bottom line is that consistent, routine maintenance and roof repair is quite economical when compared with major repairs. Checking up on maintenance of your roof can stop leaks. This maintenance work ought to be done correctly and to a high standard. Employ a reliable roof specialist to carry out quality work for you. Rest easy knowing you’ve made good decisions about your roof work and you won’t have leaks for a long time to come. If you aren’t looking after your roof routinely then might you soon face issue of leakage. Roof repair is the best option to keep your home secures from the leakage and don’t attempt to correct complicated leaks on your own. Also regular care of roof is less expensive than major repair.

 

 

The Top 10 Most Common Roof Problems

 Many times when your roof needs to be repaired, it will happen without warning. Be familiar with these roofing problems so that you’ll have the right response to every situation.

 

Obvious or unforeseen, roof problems are always a pain and undoubtedly a significant expense. BUILDINGS magazine examined which problems are most common and the conditions that can either cause or be the result of premature failure and reduced service life of low-slope roof systems. This is not a self-diagnostic guide, but rather an informative list of some of the problems most often battled by building owners and facilities professionals.

“If you look at a failure curve, most roofs are the best they’re going to be at the time they are installed. The curve is pretty flat in terms of their deterioration for the first several years, and the last 25 or 30 percent of the roof [life], the curve becomes more steep,” explains Ron Harriman, vice president, Benchmark Inc., Cedar Rapids, IA. Unfortunately, problems are inevitable as the roof ages. Without proper and routine maintenance, these minor problems can even become catastrophic.

1) ROOF LEAKS AND MOISTURE

“With any roof – no matter what type – if you’ve got roof leaks, then you’ve got a problem,” explains Charles Praeger, executive director,Metal Building Manufacturers Association (MBMA), Cleveland. Leaks can occur for a number of reasons. Built-up roofs (BUR) might experience leaks due to flashing details that weren’t fastened properly during installation. “The problems an owner is typically going to have [with a BUR system] is that 95 percent of leaks occur at flashing details – anywhere the membrane itself is terminated or interrupted,” explains Helene Hardy Pierce, director of contractor services, GAF Materials Corp., Wayne, NJ. Additionally, hot bituminous and torch-applied modified bitumen roofs may experience leaks when a proper moisture barrier is not installed underneath a coping cap on parapet walls, according to Avoiding Common Roof Installation Mistakes, a CD-Rom produced by the Center for the Advancement of Roofing Excellence (CARE Ltd.).

The CARE CD-Rom also pinpoints improper installation of flashing as a source of leaks on torch-applied modified bitumen roofs. Inadequate head laps and backwater laps are another mod bit installation problem that can allow moisture infiltration. “Water can get under the membrane if the field of roof is installed so that water flows against the lap. The consequences of backwater laps are leaks and blisters, which can lead to roof failure,” CARE explains. With cold-applied modified bitumens, improper storage of materials can result in moisture infiltration built into the roofing system, and under-application of adhesive can result in poor lamination and roof leaks.

Leaks can result when single-ply membrane roofs are installed with poor seams. “You’ve got to have good seams with single-ply, because if you don’t, you don’t have much. The membranes themselves will hold water. You’ve got to have the seams either glued or heat-welded properly,” Harriman explains.

2) BLOW-OFFS, TENTING, REDUCED WIND UPLIFT RESISTANCE, AND BILLOWING

Leaks are not the only problem that can result from improperly installed flashing. Hot bituminous roofs where flashing is poorly attached may experience open seams and laps and ultimately cause blow-offs, reduced puncture resistance, and code issues, advises CARE. Poor gravel embedment and the use of an inadequate number of fasteners in the base sheet during application of both hot bituminous and torch-applied mod bit roof systems can also have similar consequences.

Wind uplift resistance can be reduced greatly if seams are not cured adequately on cold-applied mod bit systems. CARE notes, “Seams made with cold adhesives do not have good integrity until the adhesive has cured. If the seams are exposed to wind and rain before they are properly cured, moisture can infiltrate the roof system or wind uplift can damage the roof membrane.”

If not adhered properly to the substrate, single-ply roofs are at risk for blow-off and billowing. “With single-ply membranes, we do a little more to hold things in place, and if it’s not done properly, then we end up with tenting of the flashings [and] we end up damaging the membrane,” says Pierce.

3) POOR INSTALLATION AND UNSATISFACTORY WORKMANSHIP

A faulty installation dramatically increases the likelihood of problems and reduces a roof system’s life expectancy. “Workmanship does tend to be one of the more common problems or common reasons for problems that crop up at some point in the life of the roof,” Harriman comments. BUR system installation can be problematic if specific …

 

Read more: http://www.buildings.com/article-details/articleid/1735/title/the-top-10-most-common-roof-problems.aspx

Mold and Mold Infestation

Mold can very easily enter into any home because mold is a natural organism. It can cause damage to the house particularly furniture, ceilings and wall foundation. Residences, mainly made up of timber is a veritable haven for mold, and teaming that with dampness could certainly help for the growing of mold in a house. You must have the background and knowledge on how to prevent and detect these molds to prevent from ruining your property.

You’ll find visible and invisible molds. But, people have a tendency to ignore visible mold in their house, believing these are simply dust or things that aren’t actually serious. Times when visible mold comes out occurs when larger colonies appear, and group together, and that’s when people’s concerns starts. Often the mold is at the rear of the walls of a property and it really is more severe than what the people realize is seen. And then, a mold remediation firm comes in that reveals to the property owner of more mold as compared to what they actually expected.

Mold growth usually begins in small and simple situation at home. A handful of signs that there is a moisture problem involve water stains or discoloration on wall space, flooring or ceilings at home. Discovering these could be a sign that there is mold growing within or behind the material. In addition, if you notice lots of cumuli in the house then it is a sign that you have a large amount of moisture and therefore a sign that you might have a mold problem. Mold spores will not multiply or develop in a deficiency of moisture. Therefore, indoor mold development could very well be prevented by managing indoor moisture and humidity. It’s important to prevent serious damage that these molds can cause and to safeguard the family too.

Every time a household owner looks into handling their mold problem, they engage a professional mold remediation organization. Should a homeowner practices the appropriate guidelines in solving the issue in advance then it is typically needless for these firms to do the removal job. But, should they do come; they will complete the work effectively, due to their expert training and comprehensive procedures.

Should you have suspicion that there may be mold at home, your next step is to employ an inspector to come and examine your home for mold. You have to be confident that you that the company or individual you’re hiring is certified. This means that they have proper education and learning and in-depth skills to successfully locate your mold, check the correct aspects of your home and can offer guidance in fixing the problem. If you follow this, you’ll certainly be positive that all the molds in the home will be erased.

 

Should You Have the Air Ducts in Your Home Cleaned?

Proper maintenance is key to ensuring heating and cooling systems work efficiently. Here are some tips on maintaining the home’s system, including important information about duct cleaning.

 

 Should you have air ducts in your home

Duct cleaning has never been shown to actually prevent health problems. Neither do studies conclusively demonstrate that particle (e.g., dust) levels in homes increase because of dirty air ducts. This is because much of the dirt in air ducts adheres to duct surfaces and does not necessarily enter the living space. It is important to keep in mind that dirty air ducts are only one of many possible sources of particles that are present in homes. Pollutants that enter the home both from outdoors and indoor activities such as cooking, cleaning, smoking, or just moving around can cause greater exposure to contaminants than dirty air ducts. Moreover, there is no evidence that a light amount of household dust or other particulate matter in air ducts poses any risk to your health.

You should consider having the air ducts in your home cleaned if:

checkmark

There is substantial visible mold growth inside hard surface (e.g., sheet metal) ducts or on other components of your heating and cooling system. There are several important points to understand concerning mold detection in heating and cooling systems:

  • Many sections of your heating and cooling system may not be accessible for a visible inspection, so ask the service provider to show you any mold they say exists.
  • You should be aware that although a substance may look like mold, a positive determination of whether it is mold or not can be made only by an expert and may require laboratory analysis for final confirmation. For about $50, some microbiology laboratories can tell you whether a sample sent to them on a clear strip of sticky household tape is mold or simply a substance that resembles it.
  • If you have insulated air ducts and the insulation gets wet or moldy it cannot be effectively cleaned and should be removed and replaced.
  • If the conditions causing the mold growth in the first place are not corrected, mold growth will recur.
checkmark

Ducts are infested with vermin, e.g. (rodents or insects).

checkmark

Ducts are clogged with excessive amounts of dust and debris and/or particles are actually released into the home from your supply registers.

If any of the conditions identified above exists, it usually suggests one or more underlying causes. Prior to any cleaning, retrofitting, or replacing of your ducts, the cause or causes must be corrected or else the problem will likely recur.

Some research suggests that cleaning heating and cooling system components (e.g., cooling coils, fans and heat exchangers) may improve the efficiency of your system, resulting in a longer operating life, as well as some energy and maintenance cost savings. However, little evidence exists that cleaning only the ducts will improve the efficiency of the system.

You may consider having your air ducts cleaned simply because it seems logical that air ducts will get dirty over time and should be occasionally cleaned. Provided that the cleaning is done properly, no evidence suggests that such cleaning would be detrimental. EPA does not recommend that the air ducts be cleaned routinely, but only as needed. EPA does, however, recommend that if you have a fuel burning furnace, stove or fireplace, they be inspected for proper functioning and serviced before each heating season to protect against carbon monoxide poisoning.

If you do decide to have your air ducts cleaned, take the same consumer precautions you normally would in assessing the service provider’s competence and reliability.

Air duct cleaning service providers may tell you that they need to apply chemical biocide to the inside of your ducts as a means to kill bacteria (germs) and fungi (mold) and prevent future biological growth. They may also propose the application of a “sealant” to prevent dust and dirt particles from being released into the air or to seal air leaks. You should fully understand the pros and cons of permitting application of chemical biocides or sealants. While the targeted use of chemical biocides and sealants may be appropriate under specific …

 

Read more: https://www.epa.gov/indoor-air-quality-iaq/should-you-have-air-ducts-your-home-cleaned

Water Heater Troubleshooting & Repairs

Hot water is an immediate need for every household thus dealing with a broken hot water heater is frustrating and disappointing.  Who would want to take a bath in any icy cold water early morning right? If this is one of your usual issues, here are some tips that will help you prevent and address the problem.

 

Do you need to troubleshoot water heater problems or repair your water heater?

Water heater problems normally become self-evident: A hot water faucet fails to summon hot water, you see dripping or puddling near the water heater, or the tank makes strange gurgling or popping sounds.

Though many gas utility companies will make a free house call to solve problems with a gas water heater’s burner or the gas supply to the tank, you’re on your own when it comes to other water heater problems. It helps to know how to solve basic outages yourself, as discussed below. For more difficult issues, contact a qualified local water heater repair person.

Typical water heater problems include a leaking tank (see Water Heater Is Leaking), not enough hot water, water that is too hot or not hot enough, strange noises in the tank, and discolored or smelly water. Most of these kinds of problems are relatively easy to diagnose and handle if you understand how water heaters work. See How a Storage Water Heater Works.

 

No Hot Water

With a water heater, the most common complaint is that it doesn’t heat water at all. Because a gas water heater operates much differently than an electric water heater, dealing with a water heater that doesn’t work at all will depend on whether it is gas or electric. (A gas water heater has a burner at the bottom and a flue at the top; an electric one is powered by a large electrical hookup.) Please jump to one of these two pages:

 

Not Enough Hot Water or Water Too Hot

Two of the most common problems with hot water heaters are that they produce water that is either not hot enough or too hot. The quickest and most obvious first step is to adjust the temperature dial on the front of the water heater, wait a little while, then check the water temperature at a faucet. But if adjusting the temperature dial doesn’t do the trick, try the methods below.

 

Try adjusting the temperature dial first.

© Lee Serenethos | Dreamstime.com

Try adjusting the temperature dial first.

Not Enough Hot Water

An undersized water heater is usually the culprit if it seems like you never have enough hot water in your home. If the problem is chronic—or if you’ve increased your needs for hot water by installing a big new soaking tub or high-flow shower head—you’ll probably need to get a new, larger water heater. Be sure to look into tankless water heaters because, with this type, you never run out of hot water.

On the other hand, if you’ve had enough hot water in the recent past but your water heater suddenly seems …

Read more: http://www.hometips.com/repair-fix/hot-water-heater-problems.html

Avoiding Mistakes For Plumbing Do-It-Yourselfers

A small plumbing problem may be the reasons for serious problems for a home. Sometimes when you believe you may manage the situation, you are going to attempt to conduct the repair by yourself. Yet have you ever been at a stage where you have attempted to fix something and just made the problem much worse? This really is reason why people ought to be very mindful when working with plumbing issues at home. Despite the fact that our plumbers have routine maintenance or scheduled work, the majority of the requests that plumbers get are for emergency services. These are even made worse due to inappropriate way of managing it. Here are few of them that plumbers say homeowners usually make.

Here are some of the common plumbing complications one can experience in the home and office setting.

A.    Shower
When the pipes and tubes aren’t aligned properly in the wall, this can have a strong result on the placement of the taps and perhaps the shower head. In case the showerhead is clogged, the leak can be fixed by cleaning the showerhead perforations. This can be easily performed by home owners themselves. If the issue is fixed, water pressure from the shower should visibly improve, and the leak should be no more, or at least quite unnoticeable. However, if the issue is linked to temperature or other root cause of leakages, you ought to call a technician to examine it , nor experiment or try to repair it.

B.    Toilet
Your toilet has a role, and your trash can has one too. Make sure you do not mix up the two. Even though a product is labeled “flushable,” unless it’s toilet tissue, it shouldn’t go into your pipes. Most things won’t disintegrate very well and can back up the drainpipes, which could clog up the entire house. Additionally this could affect the water pressure and other parts so not all scenarios imply that you can perform the job alone. In some cases the dirty works has to be left to the professionals.

C.    Water Heater
If you have a heating device for water with a tank, chances are high that the increasing pressure may lead to an explosion. A tank less water heater with a faulty heater plumbing can lead to a really slow trickle of water in the outflow. Therefore do not disregard small issues come across concerning your water heater.

D.    Bathtub and Sink
It isn’t strange for individuals to also experience the same glitches in relation to their bathtubs and sinks – clogged drains, temperature instabilities, and low water pressures. Should the main causes are blockages; one can just work out the setback with a good liquid clog remover. Should there be poor or worn out parts, a specialist should step in and make the needed replacements. The same goes for erroneous setups or settings, along with other issues, like rattling and whistling pipes, the collection of colored water, and busted tubing.

3 Common Plumbing Noises

Your plumbing is among the most important systems in your home, vital for your convenience. When it is working correctly, you hardly look at it and life’s a breeze. Yet if it’s not, it is a horrid pain. Once you hear loud or uncommon noises within your pipes, you must not just overlook it. These noises need treating quickly to avoid further problems for your plumbing. Whenever you turn on your water and hear a lot of squeaking, rattling and bumps, it is a sign that there’s a problem inside your plumbing system. Generally, when you hear noises in the water pipes they are caused by pipes that may not be secured correctly, yet often, the main problem is more technical. Some individuals can repair open plumbing issues on their own, but if the noise is coming from the inside walls or under the floors, the most frequent response is to check with an experienced plumber.

a)    Whistling
A “whistling noise” is triggered when water under pressure must pass through a point of restriction. A common issue is with the toilet tank intake valve. In case your toilet “whistles” as it is being refilled after flush, try out cutting down the flow by turning the supply stop slightly (the supply stop is the valve underneath the toilet that governs the flow of water into the tank). A few toilet systems come with an fine-tuning screw on the intake valve itself to fix this concern.

b)    Hammering
You would possibly notice a hammering sound from the pipes once you turn a faucet off or on quickly. It usually followed by some vibration, this noise happens because rushing water hits a quickly closing valve and comes to a sudden stop. The hammering sound is a result of the water flow being abruptly stopped and takes place for a couple of reasons. Having loose pipes which are not secured properly are one of the more common reasons and is easily remedied. The pipes can just be strapped back to place.

c)    Chattering or Screeching
Intense chattering or screeching that occurs when a valve or faucet is switched on, and this usually vanishes in the event the fitting is opened fully, signals loose or defective internal parts. The solution is usually to switch the valve or faucet with a new one. Pumps and appliances such as automatic washers and dishwashers can move motor noise to pipes should they be incorrectly hooked up. Link such items to plumbing with plastic or rubber hoses-never rigid pipe-to isolate them.

These are merely some of the approaches your residential plumbing can relate an issue to you by means of sound. Unfortunately, the sources of such noises aren’t absolute; these are the more common reasons for crazy communication from your pipes. Contacting an expert plumber is a good way to determine what kind of solution is necessary for your chatty plumbing. Tend not to holdback attempting to overlook these signs; you might end up with far worse troubles than a rattling pipe should you leave it to chance.

Roof Restoration: Why do you need it?

You probably have ignored the thought of roof restoration before, and still are not certain that it’s truly worth every penny, then these 3 amazing benefits will probably be sure to convince you:

A.    The home’s worth shall be raised

The charm of your home is essential when you want to sell your home in the future. Once the roof is not in great condition, it’ll be very clear, thus impacting the worth of your house. It is therefore vital that you conduct restoration works for your roofing. Frequent imperfections including cracks from expansion and contraction, elevated tiles, erosion from heavy weather exposure and damage from built up debris, all take away from your home’s physical beauty and lead it to seem outdated as well as overlooked. A good roof results in a good impression not only for the entire family but also for the visitors and buyers as well. You no longer need to put your name at stake just because your roof is not pleasing.

B.    Roof life expansion

Unless safety measure is taken through roof restoration, problems in your roof are inevitable, particularly when residing in areas vulnerable to rough rain and wind. You want to make certain that changing your roof doesn’t become your sole option. Taking preventative roof restoration measures will raise its durability. Some problems are hard to identify until they have done a lot of damage. And that damage can be as far as weakening the framework of the house. The roof restoration strategy is also to strengthen the roof of the house in such way that, its damages are repaired, and it’s also enhanced to work again for more number of years.

C.    Save money

Heavy rain, blustery winds, snow, hail, etch can all have a damaging effect on a roof over the long-term, which may lead to such as damaged or lost tiles to blocked or broken guttering system. In the event you leave these damages for very long then it could risk the protection of the people inside. It gets more expensive for you to restore or repair it. Finding and addressing the issues at the earliest opportunity will allow you to save more money rather than waiting for it to be more unmanageable. Furthermore, you won’t just be conserving money on your roof maintenance bills, but on your power expenses too. The cost of running heaters and air conditioners will become unreasonably expensive when air is getting out because of your roof not being properly sealed from the weather.

What is the moral of the article? You can save big money, time and also hassle from regular restoration together with repairs.